Material Criteria Metropolitan Areas and Areas with Local Restrictions Several of the Peugeot UK Selection Criteria include a provision that the requirements of the criterion will be subject to review by the Peugeot Franchise Validation Committee. Metropolitan Areas These aredefined within the Peugeot UK Network Plan as those major cities of the UK and their surrounding urban and suburban areas with a population of 500,000 or more. Areas with Local Restrictions These are defined as areas where there are natural or legal restrictions imposed on either the buildings or the environment of the contract site which prevent the contract holder from achieving compliance with the Peugeot UK Selection Criteria. For example, abnormally low planned volumes as a consequence of operating in an isolated market, or listed buildings, preservation orders, local government restrictions,etc. AM1 SITE DEDICATION. REQUIREMENT The contract site must be dedicated to the distribution and/or repair of vehicles, motorcycles, cycles and associated products and services. AM2 LOCATION,VISIBILITY AND ACCESSIBILITY. REQUIREMENT The contract site should be well located, visible to passing customers and easy to access. MINIMUM VALUE The contract site must be in an optimal location with a maximum drive time of 15 minutes to the customer base residential and/or employment zone, be visible from the principal thoroughfare in the location and have easy access. Metropolitan Areas and Areas with Local Restrictions: The location, visibility and access requirements will be subject to review by the Peugeot Franchise Validation Committee. AM3 OUTSIDE AND INSIDE APPEARANCE. REQUIREMENT The contract site must have at least the following: • An identifiable Authorised Repairer façade. • Customer parking spaces. • Courtesy vehicle storage area. • Work in progress vehicle storage area. MINIMUM VALUE Façade: The building façade must be at least 15 metres long by 2 metres high. Note: Where the Vehicle Distribution contract and/or the Parts Distribution contract are applied for, in addition to the Authorised Repairer contract, the facade requirements for each contract are exclusive and accumulative, although the physical provision of the spaces on the site can be grouped together. Customer parking: There must be at least one customer parking space for every workshop bay, across all brands. The customer parking bays, including traffic circulation space, must be at least 25m2 per space. Note: Where the Vehicle Distribution contract and/or the Parts Distribution contract are applied for, in addition to the Authorised Repairer contract, the customer parking requirements for eachcontract areexclusive and accumulative, although the physical provision of the spaces on the site can be grouped together. Courtesy vehicle storage area: There must be at least one courtesy vehicle storage space for every Peugeot workshop bay. The storage area must equate to at least 12.5m2 per vehicle. Work in progress vehicle storage area: There must be at least one work in progress vehicle storage space for every Peugeot workshop bay. The storage area must equate to at least 12.5m2 per vehicle. Note: Where the Vehicle Distribution contract and/or the Parts Distribution contract are applied for, in addition to the Authorised Repairer contract, the customer parking requirements for eachcontract are exclusive and accumulative, although the physical provision of the spaces on the site can be grouped together. In the case of vehicle storage requirements, the storage area may be separately located from the principle contract site/s. Metropolitan Areas and Areas with Local Restrictions: The façade, customer parking and vehicle storage area requirements will be subject to review by the Peugeot Franchise Validation Committee. AM4 OUTSIDE AND INSIDE APPEARANCE. REQUIREMENT Inside areas, including a customer reception and waiting area, must be sized in accordance with the capacity of the workshop. MINIMUM VALUE The workshop must have a floor area of at least 30m2 per ramp (20m2 including outside traffic circulation for drive-in ramps). There must be an area set aside for a customer reception and waiting area including a coffee table and chairs. The total space set aside for reception, waiting, office, washroom and communal areas must be at least 3.5m2 per employee on the contract site. Note: Where the Vehicle Distribution contract and/or the Parts Distribution contract are applied for, in addition to the Authorised Repairer contract, the space requirements for each contract are exclusive and accumulative, although the physical provision of the spaces on the site can be grouped together. AM5 OUTSIDE AND INSIDE APPEARANCE. REQUIREMENT There must be a minimum workshop parts storage area, capable of storing sufficient quantities of sufficient stock lines to satisfy day-to-dayworkshop customer requirements. MINIMUM VALUE There must be a maximum stock density of £1,000 per m2, where the stock is valued at cost. AM6 OUTSIDE AND INSIDE APPEARANCE. REQUIREMENT There must be a Peugeot accessory display area. MINIMUM VALUE The Peugeot accessory display area must be at least 5m2 including circulation and 5m2 storage space. Note: Where the Vehicle Distribution contract and/or the Parts Distribution contract are applied for, in addition to the Authorised Repairer contract, the accessory display and storage area requirements for each contract are inclusive. The physical provision of display space on the site can be separated. AM7 COMMUNICATION AND INFORMATION SYSTEMS. REQUIREMENT The contract site must have computerised communication systems capable of being interfaced with those of Peugeot. AM8 COMMUNICATION AND INFORMATION SYSTEMS. REQUIREMENT The contract site must use a computerised Dealer Management System. AM9 COMMUNICATION AND INFORMATION SYSTEMS. REQUIREMENT The contract site must have the necessary office equipment and means of communication necessary for the repair of vehicles (telephone/fax lines, telephone switchboard, out of hours answer phone,internet access,e-mail). MINIMUM VALUE Theremust be a dedicated customer handover area of at least 25m2, either inside the building or outside. AM10 EQUIPMENT AND  TOOLING. REQUIREMENT The contract site must always have at its disposal, the tools and equipment as specified in the Peugeot tools and equipment lists. Where a limited number of these tools or equipment are not held at the contract site, permanent and quick access to them must be demonstrated. MINIMUM VALUE The contract site must possess and be able to demonstrate access to tooling and equipment ,in accordance with Peugeot specific updateable lists. AM11 EQUIPMENT AND TOOLING. REQUIREMENT The contract site must possess the recommended diagnostic equipment, the latest updates and connection to the assistance systems. MINIMUM VALUE The contract site must possess at least one Peugeot recommended diagnostic machine (currently Diag2000) for up to five Peugeot Vehicle Technicians (or equivalent in time spent) and one additional machine for every additional five Peugeot Vehicle Technicians (or equivalent in time spent). The contract site must also have ISDN connectivity to facilitate diagnostic machine updates. AM12 EQUIPMENT AND TOOLING. REQUIREMENT The contract site must have a subscription to all Peugeot technical documentation.